readConversionProperties.H File Reference

Go to the source code of this file.

Functions

IOdictionary conversionProperties (IOobject("conversionProperties", runTime.constant(), mesh, IOobject::MUST_READ_IF_MODIFIED, IOobject::NO_WRITE))
 
scalar startTime (conversionProperties.get< scalar >("startTime"))
 
word vComp (conversionProperties.get< word >("vector"))
 
word format (conversionProperties.get< word >("format"))
 
 if ((format !="ascii") &&(format !="ieeei4r8"))
 
word cells (conversionProperties.get< word >("cells"))
 
 if ((cells !="hex"))
 

Function Documentation

◆ conversionProperties()

IOdictionary conversionProperties ( IOobject("conversionProperties", runTime.constant(), mesh, IOobject::MUST_READ_IF_MODIFIED, IOobject::NO_WRITE)  )

◆ startTime()

scalar startTime ( conversionProperties.get< scalar >  "startTime")

◆ vComp()

word vComp ( conversionProperties.get< word >  "vector")

Referenced by for().

Here is the caller graph for this function:

◆ format()

word format ( conversionProperties.get< word >  "format")

Referenced by fileWriter::beginFieldData(), fileWriter::beginFile(), UIPstream::beginRawRead(), ISstream::beginRawRead(), OSstream::beginRawWrite(), OTstream::beginRawWrite(), UOPstream::beginRawWrite(), fileWriter::endCellData(), fileWriter::endFieldData(), fileWriter::endPiece(), fileWriter::endPointData(), fileWriter::enter_CellData(), fileWriter::enter_PointData(), fileWriter::exit_File(), if(), STLCore::isBinaryName(), ITstream::ITstream(), ensightCase::newGeometry(), ensightFile::newline(), ITstream::parse(), IOstream::print(), ensightCase::printInfo(), ensightReadFile::read(), histogram::read(), particleDistribution::read(), uncollatedFileOperation::read(), regionSizeDistribution::read(), masterUncollatedFileOperation::read(), ensightReadFile::readBinaryHeader(), regIOobject::readHeaderOk(), NASCore::setPrecision(), STLReader::STLReader(), VTPsurfaceFormat< Face >::write(), VTKsurfaceFormat< Face >::write(), STLsurfaceFormat< Face >::write(), internalWriter::write(), patchWriter::write(), OTstream::write(), surfaceFieldWriter::write(), UOPstream::write(), ensightFile::write(), indirectPatchWriter::write(), surfaceWriter::write(), graph::write(), vtmWriter::write(), ensightFile::writeBinaryHeader(), VTKsurfaceFormatCore::writeCellData(), VTPsurfaceFormatCore::writeCellData(), internalMeshWriter::writeCellData(), internalMeshWriter::writeCellIDs(), nastranWriter::writeFaceValue(), vtkCloud::writeFields(), VTPsurfaceFormatCore::writeFooter(), lumpedPointMovement::writeForcesAndMomentsVTP(), surfaceFieldWriter::writeGeometry(), internalMeshWriter::writeGeometry(), lagrangianWriter::writeGeometry(), VTPsurfaceFormatCore::writeHeader(), VTKsurfaceFormatCore::writeHeader(), decomposedBlockData::writeHeader(), NASCore::writeKeyword(), patchMeshWriter::writeNeighIDs(), patchMeshWriter::writePatchIDs(), internalMeshWriter::writePointIDs(), patchMeshWriter::writePoints(), Foam::vtk::writePointSet(), patchMeshWriter::writePolys(), patchMeshWriter::writePolysLegacy(), internalMeshWriter::writeProcIDs(), patchMeshWriter::writeProcIDs(), ensightFile::writeString(), nastranWriter::writeTemplate(), fileWriter::writeTimeValue(), fileWriter::writeUniform(), and lumpedPointState::writeVTP().

◆ if() [1/2]

if ( (format !="ascii") &&(format !="ieeei4r8")  )

Definition at line 29 of file readConversionProperties.H.

References Foam::abort(), Foam::FatalError, and format().

Here is the call graph for this function:

◆ cells()

word cells ( conversionProperties.get< word >  "cells")

Referenced by if().

Here is the caller graph for this function:

◆ if() [2/2]

if ( (cells !="hex")  )

Definition at line 44 of file readConversionProperties.H.

References Foam::abort(), cells(), and Foam::FatalError.

Here is the call graph for this function: